Earrings
Minutes to create: 15
Supplies needed:
Chain, 10 head pins, 2 earring wires, 8 pink faceted cubes, 2 pink faceted cat eye beads.
|
| |
|
1.
Cut a 6 link section of chain.
|
| |
|
2.
Take 1 head pin and slide on 1 pink faceted cat eye bead. Make a head pin loop and attach it to one of the end links of the 6 link section of chian. (See Bead Basics) Close loop.
|
| |
|
3.
Take 4 head pins and slide 1 pink cube bead on each head pin. Make head pin loops on each head pin.
|
| |
|
4.
Attach each of the pink cubes to 1 link of chain in the 6 link section of chain leaving 1 empty link at the top. Close head pin loops.
|
| |
|
5.
Take 1 earring wire and open the bottom loop. Attach the top link of chain to the earring wire and close the loop. Repeat all steps for second earring.
|
| |
Bracelet
Minutes to create: 25
Supplies needed:
Chain, 18 head pins, lobster clasp, 13 links of chain, 8 crackle beads, 7 pink faceted cat eye beads, 12 pink cube beads, 1 pink ribbon charm.
|
| |
|
1.
Take 12 head pins and slide 1 pink cube bead on each. Make head pin loops on each one. Close loops. Separate 12 links of chain and attach a link to each head pin loop. Close links.
|
| |
|
2.
Take 2 head pins and cut off the heads. Make a head pin loop on 1 end of the head pins and slide the following beads on each head pin: 1 pink cat eye, 1 chain link with cube bead attached, 1 crackle, 1 chain link with cube bead attached & 1 pink cat eye. Make a head pin loop on the end. Close loops. Set aside.
|
| |
|
3.
Take 2 head pins and cut off the heads. Make a head pin loop on 1 end of the head pins and slide the following beads on each head pin: 1 crackle, 1 chain link with cube bead attached, 1 pink cat eye, 1 chain link with cube bead attached & 1 crackle. Make a head pin loop on the end. Leave loops open. Set aside.
|
| |
|
4.
Now you will attach the bead sections to each other. Take 1 bead section and attach 1 chain link with cube bead attached to one of the head pin loops. Close the loop. Take another bead section (different design than the first section) and attach 1 of the head pin loops to the chain link with cube bead attached that is already attached to the first bead section. Close loop. Repeat this process to attach the remaining 2 bead sections.
|
| |
|
5.
Take remaining chain link with cube bead attached and attach it to the end head pin loop. Close loop.
|
| |
|
6.
Take 1 head pin and cut off the head. Make a head pin loop and slide on 1 crackle bead. Make another head pin loop and attach it to the chain link with cube bead attached at the end of the bracelet. Close loop.
|
| |
|
7.
Cut a 6 link section of chain and attach it to the head pin loop of single crackle bead at the end of the bracelet. Close loop.
|
| |
|
8.
Take a head pin and slide on 1 crackle bead and 1 pink cat eye bead. Make a head pin loop and attach it to the end link of the 6 link section of chain. Close loop.
|
| |
|
9.
Take a 2 link section of chain and attach it to the head pin loop on the opposite end of the bracelet. Close loop.
|
| |
|
10.
Open the end link on the 2 link section of chain and attach your lobster clasp, remove tag. (See Bead Basics) Close link.
|
| |
|
11.
Open 1 chain link and attach it to the pink ribbon charm. Attach the charm to the 8 link section of chain. Close link.
|
| |
